Solar LED lamp tilt Wall Outdoor Sensor with Movement
Installation is simple, just fasten it to the wall using the supplied plugs without the need to connect to an electrical system.
3 Watt solar panel placed on the top allows you to recharge the lithium battery of 2200mAh which is located inside of the appliqué solar dusk and the light comes on automatically in low power mode, that stays on steadily low intensity, and when the presence sensor detects motion lights at maximum power delivering 500 lumens for 30 seconds. If the lamp returns to intensity equal to 10% total efficiency at that moment of time the sensor does not detect motion, otherwise it remains on at full power until there is no more movement.
- Solar panel: 3 Watt 5.5V
- Maximum brightness: 500 lumens
- 56 LED
- Internal Battery: 3.7V 2200mAh Li-ion (Lithium)
- Material: outdoor plastic (ABS + PC)
- Integrated light sensor
- Integrated presence sensor
- Low consumption lighting accounting for 10% total efficiency; full 500 lm lighting to presence detection
- Degree of protection: IP65
- Solar Charging time: 6-8 hours
- Operating temperature: -25 ° C / 65 ° C
- Length: 228 mm
- Width: 185 mm
- Height: 29 mm
- THERE IS
- Solar LED Lamp Outdoor
- Fixing screws
- User manual
|Power||3 W||Lamp replacement||-|
|Degrees Kelvin (color gradation)||-||Lumen||500|
La lampada solare è perfetta, anche meglio di quello che pensassi. Sono pienamente soddisfatto!