Matrix Extender Wireless HDMI 50m TX

This wireless HDMI extender, allows you to transmit and extend the HDMI signal up to 50 meters away wirelessly, has a strong anti-interference capability with an operating frequency of 5 GHz. It supports not only the configuration point -to-point,(1 Trasmitter and1 Reicever not included) but also a configuration from one to many points (from 1 to 2) and from many to many points (from 2 to 2, from 2 to 1). IDATA HDMI-WL88M supports a wide-range 20-60 KHz IR pass-back frequency to achieve remote control of source devices from the receiver side. With both control buttons and the IR controller, it easily makes the channel setting. It's a great solution for transmitting one or more HDMI source signals to one or more wireless long-distance screens running simultaneously, perfect for conferencing, home entertainment and training applications, etc.
Attention requires the code receiver: IDATA HDMI-WL88MR

Note:
1) The transmission distance of 50m is declared for open spaces
2) Walls or windows will shorten the coverage signal range or cause a large loss of signal
3) It is recommended that the distance between each unit is more than 5 meters

Features

• Smart portable design, wonderful performance
  
• Maximum resolution up to 1080p Full HD
  
• Strong anti-interference ability working at the operating frequency of 5GHz
  
• Support point-to-point configuration, from one to many points (from 1 to 2) and from many to many points (2 to 2, 2 to 1)
  
• IR pass-back support with 20-60KHz frequency
  
• Supports button control to set channels and the IR controller to change and choose input sources from the receiver side
  
• Transmission distance of 50 m
  

Connection instructions
1) Connect the HDMI input with the HDMI source device and connect the IR blaster extension cable with the IR OUT interface of the sender (TX)
2) Connect the HDMI output with the HDMI display device and connect the IR receiver extension cable with IR IN interface
3) Turn on the device (power led lights) and it will be ready for use

Technical specifications

• Voltage / current DC5V / 2A
  
• TX absorbed power < 7W; Rx < 5W
  
• HDMI1.3 compliance
  
• HDCP1.2 compliance
  
• HDMI resolution supported: 480i @ 60Hz; 480p @ 60Hz; 576i @ 50Hz; 576p @ 50Hz; 720p @ 50 / 60Hz; 1080i @ 50 / 60Hz; 1080p @ 50 / 60Hz
  
• Supports L / R stereo audio audio formats
  
• Maximum transfer rate 10.2 Gbps
  
• L / R stereo audio signal transmission format
  
• TMDS signal input and output 0.5 ~ 1.5Vp-p (TMDS)
  
• 5Vp-p DDC signal input and output (TTL)
  
• Support cable length supported ≤5 m (AWG26 standard HDMI1.3 cable)
  
• Supported output cable length ≤5m (AWG26 standard HDMI1.3 cable)
  
• IR remote control IR pass-back support with a frequency of 20-60 KHz
  
• 5.8G wireless transmission method
  
• Transmission distance 50 meters
  
• Latency ≤200 ms
  
• Mean time between failures (MTBF)> 30000 hours
  

Environmental characteristics

• Operating temperature: 0 ~ 50 °C
  
• Storage temperature: -10 ~ 70 °C
  
• Humidity: 0 ~ 90% (without condensation)
  

Size

• Width: 95 mm
  
• Depth: 120.58 mm
  
• Height: 20.1 mm
  

• 1x Matrix Extrender Transmitter
  
• 1x IR transmitter cable
  
• 1x 5V 2A power supplies
  
• 1x Installation Guide
  
• 1 x Remote controller