Splitter / Amplifier HDMI 1 in 8 out Cat 5

Splitter / Amplifier HDMI video signal 1 in 8 Out RJ45. It distributes the HDMI input into eight identical outputs simultaneously. Eight Receivers HDMI over Cat5 x1 receive the distributed signal from the splitter and transmit to monitor individually. Each receiver works with the splitter as a full functional module. Thanks to a UTP cable with inner liner of couples, the full functional module extend the HDTV display up to 50 meters for 1080p.

Characteristics

• Easy to use: installs in seconds, requires no setup
• A pair is a full functional module
• A single CAT-5e / 6 cable can substitute HDMI cable to achieve long distance transmission.
• Complies with IEEE-568B
• The length of the transmission can reach up to 50 meters for 1080p using UTP cable with splitter couples the internal
• Supports highest video resolution 1080p
• Supports bandwidth of 165MHz / 1.65Gbps per channel (4.95Gbps all channels)
• Supports 8bit 8bit deep color per channel (24bit all channel)
• Supports uncompressed audio such as LPCM

Specification

• Input DDC Signal: 5 volts p-p (TTL)
• Maximum Single Link Range: 1920x1080p
• Video Output: HDMI
• Video Bandwidth: 1.65Gpbs / 165MHz
• Vertical Frequency Range: 50 / 60Hz
• Resolutions (HDTV)

- Interlaced (50 & 60Hz): 480i, 576i, 1080i
- Progressive (50 & 60Hz): 480p, 576p, 720p, 1080p

Transmission Distance

• Cable CAT.5e / 6 to 50M 1080p

General Information

• Dimensions (W-A-D) 441x202x45 mm (Basic)
• Dimensions (W-A-P) 100x65x25.5 mm (Remote)
• Weight: 385g (remote), 2218g (Basic)
• External power supply 5V DC @ 4A 15W (base), DC @ 2A 5W (remote)

The Package Includes

• Base Amplifier 8-port
• 8 receivers
• 1 x Power supply 5V DC @ 4A for the base
• 8 x Power Supply 5V DC @ 2A for remote
• User manual